explaingit

krikzz/megadoctor

Analysis updated 2026-05-18

26C#Audience · developerComplexity · 4/5Setup · hard

TLDR

A hardware diagnostics tool that turns a special game cartridge into a device for troubleshooting broken Sega Mega Drive consoles.

Mindmap

mindmap
  root((MegaDoctor))
    What it does
      Hardware diagnostics
      Mega Drive Genesis
      Cartridge based tool
    Tech stack
      C sharp PC utility
      FPGA mapper
      Diagnostic ROM
    Use cases
      Console troubleshooting
      Bus signal analysis
      Clone hardware faults
    Audience
      Retro hardware fans
      Repair technicians

Code map

Detail Auto

An interactive map of this repo's files and how they connect — its source is parsed live in your browser. Click Visualize to build it.

filefunction / class

What do people build with it?

USE CASE 1

Insert the diagnostic cartridge into a malfunctioning Mega Drive console to identify the failure.

USE CASE 2

Run the PC utility over USB to view diagnostic results from the console.

USE CASE 3

Switch to a second test mode to check for a known B32 signal fault on clone consoles.

USE CASE 4

Use passive bus monitoring when a console is too damaged to boot the diagnostic ROM at all.

What is it built with?

C#FPGA

How does it compare?

krikzz/megadoctorleolope-z/crosshairxalekk89/llama-cpp-windows-manager
Stars262625
LanguageC#C#C#
Setup difficultyhardeasyeasy
Complexity4/51/52/5
Audiencedevelopergeneralvibe coder

Figures from each repo's GitHub metadata at analysis time.

How do you get it running?

Difficulty · hard Time to first run · 1h+

Requires a Mega EverDrive PRO/CORE cartridge and a Mega Drive console to run against.

In plain English

MegaDoctor is a hardware diagnostics tool for the Sega Mega Drive and Genesis game consoles. It turns a specific flash cartridge called Mega EverDrive PRO or CORE into a diagnostic device, then communicates with a PC over USB to display test results. The basic idea is that when a Mega Drive console is malfunctioning, it can be hard to tell which part of the hardware has failed. MegaDoctor loads a special diagnostic program onto the cartridge and runs a series of checks. Because the diagnostic program is designed to survive even severe hardware problems like faulty memory or missing CPU signals, it can still produce useful output in situations where the console would normally fail to start. If the console is too damaged to run the diagnostic program at all, MegaDoctor switches to a passive mode and monitors the signals on the cartridge bus directly, providing low-level electrical information that can help pinpoint where the failure is. The tool offers two test modes. The default mode loads the diagnostic program in the standard cartridge address space. A second mode loads it in the address space used by the Mega-CD accessory instead, which works around a specific failure in a signal called B32. This signal is a known weak point on clone consoles built around certain chips. If the console fails in the default mode but succeeds in the second mode, that points to the B32 signal as the cause. The repository includes the source code for the diagnostic ROM, the PC utility, and a custom mapper for the cartridge hardware. Prebuilt files ready to use are provided in a dist folder. The README notes that failures in one part of the hardware can affect the readings for other parts, so the tool provides clues rather than definitive diagnoses.

Copy-paste prompts

Prompt 1
Explain what the cart0 and cart1 test modes in MegaDoctor check for on a Mega Drive console.
Prompt 2
Help me interpret a MegaDoctor diagnostic report showing a B32 CPU CART error.
Prompt 3
Walk me through connecting a Mega EverDrive PRO cartridge and running megadoctor.exe on my PC.
Prompt 4
Explain what the custom FPGA mapper in this repository does for the diagnostic cartridge.

Frequently asked questions

What is megadoctor?

A hardware diagnostics tool that turns a special game cartridge into a device for troubleshooting broken Sega Mega Drive consoles.

What language is megadoctor written in?

Mainly C#. The stack also includes C#, FPGA.

How hard is megadoctor to set up?

Setup difficulty is rated hard, with roughly 1h+ to a first successful run.

Who is megadoctor for?

Mainly developer.

Open on GitHub → Explain another repo

This repo across BitVibe Labs

Verify against the repo before relying on details.